TRF SERIES

Perfect solution for plastic film recycling.
TRF Series machine combines waste size reduction, storage, feeding, extrusion and pelletizing all together, provides a perfect solution for plastic waste recycling, it is not only very easy to operate but also produce good quality recycled pellets at high output capacity.

BENEFITS
SPECIFICATIONS
PHOTOS

The waste is crushed and granulated first, so it can take both film waste & some lump waste. ( unlike the shredding drum system which can only handle film waste. )
After granulating, the small flakes or chips are blown an kept in a large storage tank. Under this tank, there is a stirring motor to push the waste into the side screw feeder, and then transport into the extruder without requiring heater bands.
The waste is then fed into the extruder by an inverter controlled screw feeder, allowing a smooth flow of material, increasing the capacity of the main extruder.
Factory Staff can also granulate the waste in advance and store in the big silo before feeding the extruder, making staff more efficient, unlike the drum systems which require staff to feed the conveyor all the times.
There is an option of a masterbatch or solid chips top feeder. Allowing the client the facility to add some additives, masterbatch or solid chips , if required.

The pellets produced can be as the same standard and appearance as virgin granules.
Larger die face allows more die holes and bigger hole gap to avoid pellets clumping together. More holes leads to less resistance of material flow, so it reduces the tendency for material coming out from the vent.
Unique die design allows longer overlap gap between each hole, with bigger size cutting knife to ensure the longer lifetime. - Longer lifetime of cutting motor with running in slower & logical rpm due to larger die face and more holes.

Allowing the pellets to dry completely. It is also compact, and space saving in comparison to the vibrating tank.

Has a 3 - 5 times larger filter area than slide type filters to save the labor time in changing filters, and the additional cost of the filter screens.
Continuous Non-stop operation, no need to shut down or slow down the speed of extruder.

Model		TRF-65V	TRF-85V	TRF-100V		TRF-120V	TRF-150V	TRF-180V
Material		LDPE、LLDPE、HDPE、PP、ABS、PS
Capacity	PE(kg)	100-150	150-250	250-350		400-550	600-800	800-1000
	PP(kg)	80-120	120-180	200-250		300-450	500-700	700-900
Side feeding device with screw & barrel x 1 set
Storage tank (liter)		1500	2000	2000		2000	3000	3000
Feeding motor		5HP	7.5HP	10HP		15HP	20HP	30HP
Extruder
Screw	Φ	65	85	100		120	150	180
	L/D	32/1	32/1	32/1		32/1	32/1	32/1
Screw material		SACM645 nitrided, and hard chrome plated
Motor + inverter		40HP	60HP	100HP		125HP	200HP	300HP
Barrel thermo Zone		3	4	5		6	7	9
Barrel cooling		1/4 HP*2	1/4 HP*2	1/2 HP*3		1/2 HP*3	1/2 HP*3	1/2 HP*3
Barrel material		SACM645 nitrided, honed, hardness treatment
Screen changer ( Hydraulic slide type ) with pressure gauge
Filter diameter (MM)		150	200	200		250	300	350
Driving Motor		3HP	3HP	5HP		5HP	7.5HP	10HP
Die face cutting device - with 3pcs big knife
Cutter motor(inverter)		2HP	2HP	2HP		3HP	3HP	5HP
Cooling water pump		2HP	3HP	3HP		5HP	5HP	7.5HP
Vibration screen & water trough
Vibration motor		1/4 HP x2	1/3 HP x2	1/2 HP x2		1/2 HP x2	1/2 HP x4	1/2 HP x4
Pellet Blower motor		3HP	3HP	5HP		5HP	5HP	7.5HP
Options :
Water cooling tower					Second stages extruder for heavy ink waste
Vacuum pump					Quantitative feeder for masterbatch or solid chips
Metal detector with conveyer					Double vented type barrel
Crusher + conveying blower					Centrifuge dewatering drying device
Dual piston type screen changer ( larger filter area)					Vibrating classifier
SPECIFICATION FOR REFERENCE ONLY WE RESERVE THE RIGHT TO ALTER OR AMEND THE DESIGN