| Model | PP-45 | PP-55 | PP-65 | PP-75 |
| Production | PP Tubular film | |||
| Width of Film (MM) | 100~400 | 300~550 | 400~700 | 500~850 |
| Thickness of Film | 0.02~0.06mm | |||
| Extrusion Output( kgs/hr ) | 25~35 | 30~50 | 45~55 | 65~80 |
| Extruder | ||||
| Type of Eetruder | DOWNWARD EXTRUSION TYPE | |||
| Main Motor | 15HP + inverter | 25HP + inverter | 30HP + inverter | 50HP + inverter |
| Gear Box | Material FC 25 | |||
| Type | Gear Box Lubricant exchange | |||
| Gear Material | SCM-21 Carbon Treat & Gear Face Ground | |||
| Screw | ||||
| Screw Diameter | Ø 45 | Ø55 | Ø65 | Ø 75 |
| L/D Ratio | 28 / 1 | 28 / 1 | 28 / 1 | 28 / 1 |
| Material | SCM-4 WITH NITRIDED, POLISHED AND HARD CHROME PLATED. | |||
| Barrel | SACM-645 NITRIDED, HONED AND HARD CHROME PLATED HARDNESS | |||
| Auto Thermal controller | 2 zone | 2 zones | 3 zone | 4 zone |
| Barrel Heating Capacity(kw) | 6.91 | 9.8 | 13.5 | 25 |
| Die Head | ||||
| Die Lip Diameter(mm) | 150 | 200 | 300 | 400 |
| Auto Thermal controller | 2 zones | 2 zones | 2 zones | 2 zones |
| Heating Capacity | 3.8 (KW) | 4.0 (KW) | 8.2 (KW) | 10.6 (KW) |
| Air Ring | 1 SET | |||
| Blower(hp) | 1/2 | 1/2 | 1 | 2 |
| Water Ring | 8PCS | 8PCS | 8PCS | 8PCS |
| Take-off unit | ||||
| Pinch Roller | 500 | 650 | 800 | 1000 |
| Winder | TWO SHAFTS TYPE | |||
| Torque Motor(kg-m) | 0.2x2sets | 0.2x2sets | 0.3x2sets | 0.3x2sets |
| Winding Speed | 0~50m/min | |||
| Control Panel | 1 SET (BUILT-IN TYPE) | |||
| Drying Unit | 1 set | |||
| Options : | ||||
| Auto Loader | Double Station Winder | |||
| Corona Treater | Hopper dryer | |||
| Air Compressor | ||||
| SPECIFICATION FOR REFERENCE ONLY WE RESERVE THE RIGHT TO ALTER OR AMEND THE DESIGN | ||||
