| Model | DMS 55/500 | DMS 55/800 | |
| Production | HD/LDPE Tubular film | ||
| Width of Film (MM) | 450 | 700 | |
| Thickness of Film | 0.008~0.1mm | ||
| Extrusion Output( kgs/hr ) | HDPE 50~55 LDPE 55~65 |
||
| Extruder | |||
| Type of Eetruder | LOW BASE TYPE | ||
| Main Motor | 30HP + inverter | ||
| Gear Box | Material FC 25 | ||
| Type | With Forced Lubrication System & Cooler | ||
| Gear Material | SCM-21 Carbon Treat & Gear Face Ground | ||
| Screw | |||
| Screw Diameter | Ø 55 | ||
| L/D Ratio | 30 / 1 | ||
| Material | SACM-645 Nitrided, Polished and Hard Chrome Plated Hardness | ||
| Barrel | SACM-645 Nitrided, Honed and Hard Chrome Plated Hardness | ||
| Auto Thermal controller | 3 zones | ||
| Barrel Cooling | With Air-Cooling Blower | ||
| Die Head x 2 sets | |||
| Die Type | Spiral Type | ||
| Auto Thermal controller | 2 zones | ||
| Air Ring | 1 SET | ||
| Bubble Cooling | 3HP | ||
| Adaptor | |||
| Screen Filter | Ø50 × 1 | Ø50 × 1 | |
| Auto Thermal controller | 1 | ||
| Take-up unit x 2 sets | |||
| Drive Motor | 1HP AC + inverter Control + reducer with coupling | ||
| Pinch Roller | 162mm dia. X 500mm (L) | 162mm dia. X 800mm (L) | |
| Take Up Tower | Height adjustable type, with pneumatic nip roller | ||
| Winder | Manual Surface Contact Winder | ||
| Winding Motor | 0.3kg/M torque motor + reducer with coupling | ||
| Winding Roller | 250mm dia. X 500mm (L) | 250mm dia. X 800mm (L) | |
| CONTROL PANEL | 1 SET | ||
| Options : | |||
| Auto Loader | Double Station Winder | ||
| Embossing Roller | Winder upgraded to 1000mm winding dia. | ||
| Corona Treater | Bubble controller | ||
| Hot Knife | Air Compressor | ||
| Level type manual screen changer | |||
| SPECIFICATION FOR REFERENCE ONLY WE RESERVE THE RIGHT TO ALTER OR AMEND THE DESIGN | |||
